এই কৌশলটি একটি বিস্তৃত প্রবণতা মূল্যায়ন সিস্টেম গঠনের জন্য এসএসএল চ্যানেল এবং কিউকিউই গতির সূচককে একত্রিত করে। এটি যখন মূল্য এসএসএল চ্যানেলটি ভেঙে দেয় তখন এটি প্রবেশ করে, কিউকিউই সংকেতগুলির অতিরিক্ত নিশ্চিতকরণের সাথে। ঝুঁকি পরিচালনার জন্য স্টপ এবং প্রস্থানগুলি প্রয়োগ করা হয়।
এর মূল উপাদানগুলো হল:
এসএসএল চ্যানেলঃ দামের প্রবণতা চিহ্নিত করা।
QQE সূচকঃ গতি নিশ্চিত।
ব্রেকআউট এন্ট্রিঃ QQE সিগন্যালের সাথে মিলিত প্রাইস ব্রেকিং এসএসএল ব্যান্ড।
স্টপ এবং আউটপুটঃ প্রতি ট্রেডের ক্ষতি/লাভ নিয়ন্ত্রণের জন্য ATR-ভিত্তিক স্টপ এবং আউটপুট।
স্কেল ইনঃ ধীরে ধীরে অবস্থান বৃদ্ধি, মুনাফা গ্রহণ এবং পুনরায় বরাদ্দ।
প্রবণতা এবং গতির সরঞ্জামগুলির সমন্বয় একটি কৌশল গঠন করে যা উভয় প্রবণতা অনুসরণ ক্ষমতা এবং ঝুঁকি নিয়ন্ত্রণের সাথে।
একক সূচক কৌশলগুলির তুলনায় এর সুবিধাগুলি হলঃ
প্রবণতার জন্য এসএসএল, বিপরীতের জন্য কিউকিউই - ভাল পরিপূরকতা।
ব্রেকআউট এন্ট্রিগুলি উচ্চতায় কেনা এড়িয়ে চলুন।
যুক্তিসঙ্গত স্টপ এবং এক্সটেনশান ট্রেড প্রতি ঝুঁকি/উপার্জন নিয়ন্ত্রণ করে।
স্কেলিং ঝুঁকি হ্রাস করে, মুনাফা লাভের ক্ষেত্রে লক করে।
সর্বোত্তম পরামিতি খুঁজে পেতে বড় অপ্টিমাইজেশান স্পেস।
বিভিন্ন বাজারে এবং সময়সীমার মধ্যে নমনীয় প্রয়োগ।
স্মার্ট অপ্টিমাইজেশনের জন্য মেশিন লার্নিং প্রয়োগের সম্ভাবনা।
একক সূচকের তুলনায় ঝুঁকি-সমন্বিত রিটার্নের সাথে সামগ্রিকভাবে স্থিতিশীল।
তবে, এর প্রধান ঝুঁকিগুলি হলঃ
ওভার ফিটিং ঝুঁকি সহ চ্যালেঞ্জিং মাল্টি-প্যারামিটার অপ্টিমাইজেশান।
এসএসএল এবং কিউকিউই-তে কিছুটা পিছিয়ে আছে।
একাধিক সূচক দিয়ে জটিলতা বৃদ্ধি।
স্কেল ইন স্লিপিং খরচ বৃদ্ধি করতে পারে।
সর্বোচ্চ ড্রাউন মনিটর করতে হবে।
পারফরম্যান্স বাজার ব্যবস্থার পরিবর্তনের সাপেক্ষে।
সময়কাল এবং যন্ত্রপাতি জুড়ে স্থিতিশীলতা যাচাই করা প্রয়োজন।
উচ্চ ব্যবসায়ের ঘনত্ব লেনদেনের খরচ বৃদ্ধি করে।
বিশ্লেষণের উপর ভিত্তি করে, উন্নতিগুলি নিম্নলিখিতগুলি অন্তর্ভুক্ত করতে পারেঃ
বিভিন্ন বাজারে এবং সময়সীমার মধ্যে পরামিতির দৃঢ়তা মূল্যায়ন করা।
ডায়নামিক স্টপ এবং আউটপুট বাস্তবায়ন।
ঝুঁকি ব্যবস্থাপনা কৌশল অপ্টিমাইজ করা।
গতিশীল অবস্থানের আকারের মডেল তৈরি করা।
স্মার্ট এন্ট্রি করার জন্য মেশিন লার্নিং অন্তর্ভুক্ত করা।
স্থিতিশীলতা যাচাই করার জন্য রোলিং উইন্ডো ব্যাকটেস্ট।
লেনদেনের খরচ প্রভাব মূল্যায়ন এবং নিয়মিততা।
স্কেলিং আকার অনুপাত অপ্টিমাইজ করা।
বাজারের অভিযোজনযোগ্যতার জন্য ক্রমাগত উন্নতি।
সংক্ষেপে, এসএসএল এবং কিউকিউই এর নিবিড় সংহতকরণ একটি স্থিতিশীল প্রবণতা অনুসরণকারী সিস্টেম গঠন করে। তবে যে কোনও কৌশল অভিযোজনশীল থাকার জন্য অবিচ্ছিন্ন অপ্টিমাইজেশন এবং পুনরাবৃত্তিগুলি অত্যন্ত গুরুত্বপূর্ণ। কেবলমাত্র ধারাবাহিক শেখার এবং বৈধকরণের মাধ্যমে কোয়ান্টাম কৌশলগুলি টেকসই সাফল্য অর্জন করতে পারে।
/*backtest
start: 2023-08-23 00:00:00
end: 2023-09-22 00:00:00
period: 2h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/
//@version=4
// Strategy based on the SSL Hybrid indicator by Mihkel00
// Designed for the purpose of back testing
// Strategy:
// - Enters both long and short trades based on SSL1 crossing the baseline
// - Stop Loss calculated based on ATR multiplier
// - Take Profit calculated based on 2 ATR multipliers and exits percentage of position on TP1 and TP2
//
// Credits:
// SSL Hybrid Mihkel00 https://www.tradingview.com/u/Mihkel00/
// -------------------------------- SSL HYBRID ---------------------------------
strategy("SSL Hybrid + QQE Strategy", overlay=true, initial_capital=5000, default_qty_value=10, default_qty_type=strategy.percent_of_equity, commission_type = "percent", commission_value=0.04, max_labels_count=500, calc_on_every_tick=true, pyramiding=10)
show_Baseline = input(title="Show Baseline", type=input.bool, defval=true, group="SSL Hybrid Indicator Settings")
show_SSL1 = input(title="Show SSL1", type=input.bool, defval=true, group="SSL Hybrid Indicator Settings")
show_atr = input(title="Show ATR bands", type=input.bool, defval=false, group="SSL Hybrid Indicator Settings")
//ATR
atrlen = input(14, "ATR Period", group="SSL Hybrid Indicator Settings")
mult = input(1, "ATR Multi", step=0.1, group="SSL Hybrid Indicator Settings")
smoothing = input(title="ATR Smoothing", defval="WMA", options=["RMA", "SMA", "EMA", "WMA"], group="SSL Hybrid Indicator Settings")
ma_function(source, atrlen) =>
if smoothing == "RMA"
rma(source, atrlen)
else
if smoothing == "SMA"
sma(source, atrlen)
else
if smoothing == "EMA"
ema(source, atrlen)
else
wma(source, atrlen)
atr_slen = ma_function(tr(true), atrlen)
////ATR Up/Low Bands
upper_band = atr_slen * mult + close
lower_band = close - atr_slen * mult
////BASELINE / SSL1 / SSL2 / EXIT MOVING AVERAGE VALUES
maType = input(title="SSL1 / Baseline Type", type=input.string, defval="HMA", options=["SMA","EMA","DEMA","TEMA","LSMA","WMA","MF","VAMA","TMA","HMA", "JMA", "Kijun v2", "EDSMA","McGinley"], group="SSL Hybrid Indicator Settings")
len = input(title="SSL1 / Baseline Length", defval=60, group="SSL Hybrid Indicator Settings")
SSL2Type = input(title="SSL2 / Continuation Type", type=input.string, defval="JMA", options=["SMA","EMA","DEMA","TEMA","WMA","MF","VAMA","TMA","HMA", "JMA","McGinley"], group="SSL Hybrid Indicator Settings")
len2 = input(title="SSL 2 Length", defval=5, group="SSL Hybrid Indicator Settings")
//
SSL3Type = input(title="EXIT Type", type=input.string, defval="HMA", options=["DEMA","TEMA","LSMA","VAMA","TMA","HMA","JMA", "Kijun v2", "McGinley", "MF"], group="SSL Hybrid Indicator Settings")
len3 = input(title="EXIT Length", defval=15, group="SSL Hybrid Indicator Settings")
src = input(title="Source", type=input.source, defval=close, group="SSL Hybrid Indicator Settings")
//
tema(src, len) =>
ema1 = ema(src, len)
ema2 = ema(ema1, len)
ema3 = ema(ema2, len)
(3 * ema1) - (3 * ema2) + ema3
kidiv = input(defval=1,maxval=4, title="Kijun MOD Divider", group="SSL Hybrid Indicator Settings")
jurik_phase = input(title="* Jurik (JMA) Only - Phase", type=input.integer, defval=3, group="SSL Hybrid Indicator Settings")
jurik_power = input(title="* Jurik (JMA) Only - Power", type=input.integer, defval=1, group="SSL Hybrid Indicator Settings")
volatility_lookback = input(10, title="* Volatility Adjusted (VAMA) Only - Volatility lookback length", group="SSL Hybrid Indicator Settings")
//MF
beta = input(0.8,minval=0,maxval=1,step=0.1, title="Modular Filter, General Filter Only - Beta", group="SSL Hybrid Indicator Settings")
feedback = input(false, title="Modular Filter Only - Feedback", group="SSL Hybrid Indicator Settings")
z = input(0.5,title="Modular Filter Only - Feedback Weighting",step=0.1, minval=0, maxval=1, group="SSL Hybrid Indicator Settings")
//EDSMA
ssfLength = input(title="EDSMA - Super Smoother Filter Length", type=input.integer, minval=1, defval=20, group="SSL Hybrid Indicator Settings")
ssfPoles = input(title="EDSMA - Super Smoother Filter Poles", type=input.integer, defval=2, options=[2, 3], group="SSL Hybrid Indicator Settings")
//----
//EDSMA
get2PoleSSF(src, length) =>
PI = 2 * asin(1)
arg = sqrt(2) * PI / length
a1 = exp(-arg)
b1 = 2 * a1 * cos(arg)
c2 = b1
c3 = -pow(a1, 2)
c1 = 1 - c2 - c3
ssf = 0.0
ssf := c1 * src + c2 * nz(ssf[1]) + c3 * nz(ssf[2])
get3PoleSSF(src, length) =>
PI = 2 * asin(1)
arg = PI / length
a1 = exp(-arg)
b1 = 2 * a1 * cos(1.738 * arg)
c1 = pow(a1, 2)
coef2 = b1 + c1
coef3 = -(c1 + b1 * c1)
coef4 = pow(c1, 2)
coef1 = 1 - coef2 - coef3 - coef4
ssf = 0.0
ssf := coef1 * src + coef2 * nz(ssf[1]) + coef3 * nz(ssf[2]) + coef4 * nz(ssf[3])
ma(type, src, len) =>
float result = 0
if type=="TMA"
result := sma(sma(src, ceil(len / 2)), floor(len / 2) + 1)
if type=="MF"
ts=0.,b=0.,c=0.,os=0.
//----
alpha = 2/(len+1)
a = feedback ? z*src + (1-z)*nz(ts[1],src) : src
//----
b := a > alpha*a+(1-alpha)*nz(b[1],a) ? a : alpha*a+(1-alpha)*nz(b[1],a)
c := a < alpha*a+(1-alpha)*nz(c[1],a) ? a : alpha*a+(1-alpha)*nz(c[1],a)
os := a == b ? 1 : a == c ? 0 : os[1]
//----
upper = beta*b+(1-beta)*c
lower = beta*c+(1-beta)*b
ts := os*upper+(1-os)*lower
result := ts
if type=="LSMA"
result := linreg(src, len, 0)
if type=="SMA" // Simple
result := sma(src, len)
if type=="EMA" // Exponential
result := ema(src, len)
if type=="DEMA" // Double Exponential
e = ema(src, len)
result := 2 * e - ema(e, len)
if type=="TEMA" // Triple Exponential
e = ema(src, len)
result := 3 * (e - ema(e, len)) + ema(ema(e, len), len)
if type=="WMA" // Weighted
result := wma(src, len)
if type=="VAMA" // Volatility Adjusted
/// Copyright © 2019 to present, Joris Duyck (JD)
mid=ema(src,len)
dev=src-mid
vol_up=highest(dev,volatility_lookback)
vol_down=lowest(dev,volatility_lookback)
result := mid+avg(vol_up,vol_down)
if type=="HMA" // Hull
result := wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len)))
if type=="JMA" // Jurik
/// Copyright © 2018 Alex Orekhov (everget)
/// Copyright © 2017 Jurik Research and Consulting.
phaseRatio = jurik_phase < -100 ? 0.5 : jurik_phase > 100 ? 2.5 : jurik_phase / 100 + 1.5
beta = 0.45 * (len - 1) / (0.45 * (len - 1) + 2)
alpha = pow(beta, jurik_power)
jma = 0.0
e0 = 0.0
e0 := (1 - alpha) * src + alpha * nz(e0[1])
e1 = 0.0
e1 := (src - e0) * (1 - beta) + beta * nz(e1[1])
e2 = 0.0
e2 := (e0 + phaseRatio * e1 - nz(jma[1])) * pow(1 - alpha, 2) + pow(alpha, 2) * nz(e2[1])
jma := e2 + nz(jma[1])
result := jma
if type=="Kijun v2"
kijun = avg(lowest(len), highest(len))//, (open + close)/2)
conversionLine = avg(lowest(len/kidiv), highest(len/kidiv))
delta = (kijun + conversionLine)/2
result :=delta
if type=="McGinley"
mg = 0.0
ema = ema(src, len)
mg := na(mg[1]) ? ema : mg[1] + (src - mg[1]) / (len * pow(src/mg[1], 4))
result :=mg
if type=="EDSMA"
zeros = src - nz(src[2])
avgZeros = (zeros + zeros[1]) / 2
// Ehlers Super Smoother Filter
ssf = ssfPoles == 2
? get2PoleSSF(avgZeros, ssfLength)
: get3PoleSSF(avgZeros, ssfLength)
// Rescale filter in terms of Standard Deviations
stdev = stdev(ssf, len)
scaledFilter = stdev != 0
? ssf / stdev
: 0
alpha = 5 * abs(scaledFilter) / len
edsma = 0.0
edsma := alpha * src + (1 - alpha) * nz(edsma[1])
result := edsma
result
///SSL 1 and SSL2
emaHigh = ma(maType, high, len)
emaLow = ma(maType, low, len)
maHigh = ma(SSL2Type, high, len2)
maLow = ma(SSL2Type, low, len2)
///EXIT
ExitHigh = ma(SSL3Type, high, len3)
ExitLow = ma(SSL3Type, low, len3)
///Keltner Baseline Channel
BBMC = ma(maType, close, len)
useTrueRange = input(true, group="SSL Hybrid Indicator Settings")
multy = input(0.2, step=0.05, title="Base Channel Multiplier", group="SSL Hybrid Indicator Settings")
Keltma = ma(maType, src, len)
range = useTrueRange ? tr : high - low
rangema = ema(range, len)
upperk =Keltma + rangema * multy
lowerk = Keltma - rangema * multy
//Baseline Violation Candle
open_pos = open*1
close_pos = close*1
difference = abs(close_pos-open_pos)
atr_violation = difference > atr_slen
InRange = upper_band > BBMC and lower_band < BBMC
candlesize_violation = atr_violation and InRange
plotshape(candlesize_violation, color=color.new(color.white, transp=0), size=size.tiny,style=shape.diamond, location=location.top, title="Candle Size > 1xATR")
//SSL1 VALUES
Hlv = int(na)
Hlv := close > emaHigh ? 1 : close < emaLow ? -1 : Hlv[1]
sslDown = Hlv < 0 ? emaHigh : emaLow
//SSL2 VALUES
Hlv2 = int(na)
Hlv2 := close > maHigh ? 1 : close < maLow ? -1 : Hlv2[1]
sslDown2 = Hlv2 < 0 ? maHigh : maLow
//EXIT VALUES
Hlv3 = int(na)
Hlv3 := close > ExitHigh ? 1 : close < ExitLow ? -1 : Hlv3[1]
sslExit = Hlv3 < 0 ? ExitHigh : ExitLow
base_cross_Long = crossover(close, sslExit)
base_cross_Short = crossover(sslExit, close)
codiff = base_cross_Long ? 1 : base_cross_Short ? -1 : na
//COLORS
show_color_bar = input(title="Color Bars", type=input.bool, defval=true, group="SSL Hybrid Indicator Settings")
color_bar = close > upperk ? #00c3ff : close < lowerk ? #ff0062 : color.gray
color_ssl1 = close > sslDown ? #00c3ff : close < sslDown ? #ff0062 : na
//PLOTS
plotarrow(codiff, colorup=color.rgb(0, 195, 255, transp=0), colordown=color.rgb(255, 0, 98, transp=0),title="Exit Arrows", maxheight=20, offset=0, display=display.none)
p1 = plot(show_Baseline ? BBMC : na, color=color.new(color_bar, transp=0), linewidth=4, title='MA Baseline')
DownPlot = plot( show_SSL1 ? sslDown : na, title="SSL1", linewidth=3, color=color.new(color_ssl1, transp=10))
barcolor(show_color_bar ? color_bar : na)
up_channel = plot(show_Baseline ? upperk : na, color=color_bar, title="Baseline Upper Channel")
low_channel = plot(show_Baseline ? lowerk : na, color=color_bar, title="Basiline Lower Channel")
fill(up_channel, low_channel, color=color.new(color_bar, transp=90))
////SSL2 Continiuation from ATR
atr_crit = input(0.9, step=0.1, title="Continuation ATR Criteria", group="SSL Hybrid Indicator Settings")
upper_half = atr_slen * atr_crit + close
lower_half = close - atr_slen * atr_crit
buy_inatr = lower_half < sslDown2
sell_inatr = upper_half > sslDown2
sell_cont = close < BBMC and close < sslDown2
buy_cont = close > BBMC and close > sslDown2
sell_atr = sell_inatr and sell_cont
buy_atr = buy_inatr and buy_cont
atr_fill = buy_atr ? color.green : sell_atr ? color.purple : color.white
LongPlot = plot(sslDown2, title="SSL2", linewidth=2, color=color.new(atr_fill, transp=0), style=plot.style_circles, display=display.none)
u = plot(show_atr ? upper_band : na, "+ATR", color=color.new(color.white, transp=80), display=display.none)
l = plot(show_atr ? lower_band : na, "-ATR", color=color.new(color.white, transp=80), display=display.none)
// ---------------------------- QQE MOD INDICATOR ------------------------------
RSI_Period = input(6, title='RSI Length')
SF = input(5, title='RSI Smoothing')
QQE = input(3, title='Fast QQE Factor')
ThreshHold = input(3, title="Thresh-hold")
rsi_src = input(close, title="RSI Source")
Wilders_Period = RSI_Period * 2 - 1
Rsi = rsi(rsi_src, RSI_Period)
RsiMa = ema(Rsi, SF)
AtrRsi = abs(RsiMa[1] - RsiMa)
MaAtrRsi = ema(AtrRsi, Wilders_Period)
dar = ema(MaAtrRsi, Wilders_Period) * QQE
longband = 0.0
shortband = 0.0
trend = 0
DeltaFastAtrRsi = dar
RSIndex = RsiMa
newshortband = RSIndex + DeltaFastAtrRsi
newlongband = RSIndex - DeltaFastAtrRsi
longband := RSIndex[1] > longband[1] and RSIndex > longband[1] ?
max(longband[1], newlongband) : newlongband
shortband := RSIndex[1] < shortband[1] and RSIndex < shortband[1] ?
min(shortband[1], newshortband) : newshortband
cross_1 = cross(longband[1], RSIndex)
trend := cross(RSIndex, shortband[1]) ? 1 : cross_1 ? -1 : nz(trend[1], 1)
FastAtrRsiTL = trend == 1 ? longband : shortband
////////////////////
length = input(50, minval=1, title="Bollinger Length")
bb_mult = input(0.35, minval=0.001, maxval=5, step=0.1, title="BB Multiplier")
basis = sma(FastAtrRsiTL - 50, length)
dev = bb_mult * stdev(FastAtrRsiTL - 50, length)
upper = basis + dev
lower = basis - dev
rsi_ma_color_bar = RsiMa - 50 > upper ? #00c3ff : RsiMa - 50 < lower ? #ff0062 : color.gray
// Zero cross
QQEzlong = 0
QQEzlong := nz(QQEzlong[1])
QQEzshort = 0
QQEzshort := nz(QQEzshort[1])
QQEzlong := RSIndex >= 50 ? QQEzlong + 1 : 0
QQEzshort := RSIndex < 50 ? QQEzshort + 1 : 0
////////////////////////////////////////////////////////////////
RSI_Period2 = input(6, title='RSI Length')
SF2 = input(5, title='RSI Smoothing')
QQE2 = input(1.61, title='Fast QQE2 Factor')
ThreshHold2 = input(3, title="Thresh-hold")
src2 = input(close, title="RSI Source")
Wilders_Period2 = RSI_Period2 * 2 - 1
Rsi2 = rsi(src2, RSI_Period2)
RsiMa2 = ema(Rsi2, SF2)
AtrRsi2 = abs(RsiMa2[1] - RsiMa2)
MaAtrRsi2 = ema(AtrRsi2, Wilders_Period2)
dar2 = ema(MaAtrRsi2, Wilders_Period2) * QQE2
longband2 = 0.0
shortband2 = 0.0
trend2 = 0
DeltaFastAtrRsi2 = dar2
RSIndex2 = RsiMa2
newshortband2 = RSIndex2 + DeltaFastAtrRsi2
newlongband2 = RSIndex2 - DeltaFastAtrRsi2
longband2 := RSIndex2[1] > longband2[1] and RSIndex2 > longband2[1] ?
max(longband2[1], newlongband2) : newlongband2
shortband2 := RSIndex2[1] < shortband2[1] and RSIndex2 < shortband2[1] ?
min(shortband2[1], newshortband2) : newshortband2
cross_2 = cross(longband2[1], RSIndex2)
trend2 := cross(RSIndex2, shortband2[1]) ? 1 : cross_2 ? -1 : nz(trend2[1], 1)
FastAtrRsi2TL = trend2 == 1 ? longband2 : shortband2
// Zero cross
QQE2zlong = 0
QQE2zlong := nz(QQE2zlong[1])
QQE2zshort = 0
QQE2zshort := nz(QQE2zshort[1])
QQE2zlong := RSIndex2 >= 50 ? QQE2zlong + 1 : 0
QQE2zshort := RSIndex2 < 50 ? QQE2zshort + 1 : 0
hcolor2 = RsiMa2 - 50 > ThreshHold2 ? color.silver :
RsiMa2 - 50 < 0 - ThreshHold2 ? color.silver : na
// plot(FastAtrRsi2TL - 50, title='QQE Line', color=color.white, transp=0, linewidth=2)
// plot(RsiMa2 - 50, color=hcolor2, transp=50, title='Histo2', style=plot.style_columns)
Greenbar1 = RsiMa2 - 50 > ThreshHold2
Greenbar2 = RsiMa - 50 > upper
Redbar1 = RsiMa2 - 50 < 0 - ThreshHold2
Redbar2 = RsiMa - 50 < lower
qqe_line = FastAtrRsi2TL - 50
qqe_blue_bar = Greenbar1 and Greenbar2 == 1
qqe_red_bar = Redbar1 and Redbar2 == 1
// plot(Greenbar1 and Greenbar2 == 1 ? RsiMa2 - 50 : na, title="QQE Up", style=plot.style_columns, color=#00c3ff, transp=0)
// plot(Redbar1 and Redbar2 == 1 ? RsiMa2 - 50 : na, title="QQE Down", style=plot.style_columns, color=#ff0062, transp=0)
// ----------------------------------STRATEGY ----------------------------------
atr_length = input(title="ATR Length", type=input.integer, defval=14, inline="1", group="Strategy Back Test Settings")
atr = atr(atr_length)
// Back test time range
from_date = input(title="From", type=input.time, defval=timestamp("01 Aug 2021 00:00 +0100"), inline="1", group="Date Range")
to_date = input(title="To", type=input.time, defval=timestamp("01 Sep 2021 00:00 +0100"), inline="1", group="Date Range")
in_date = true
// Strategy exit settings
// Stop-Loss Settings
use_tp_sl = input(title="Use TP & SL", type=input.bool, defval=true, inline="1", group="Exit Settings")
sl_atr_multiplier = input(title="SL ATR Multiplier", type=input.float, defval=1.6, step=0.1, inline="2", group="Exit Settings")
move_sl_on_tp = input(title="Move SL on TP1", type=input.bool, defval=true, inline="2", group="Exit Settings")
// Take Profit Settings
tp1_atr_multiplier = input(title="TP1 ATR Multiplier", type=input.float, defval=1.8, step=0.1, inline="3", group="Exit Settings")
tp1_exit_percentage = input(title="TP1 Exit Percentage", type=input.integer, defval=20, step=1, maxval=100, inline="3", group="Exit Settings")
tp2_atr_multiplier = input(title="TP2 ATR Multiplier", type=input.float, defval=2.2, step=0.1, inline="4", group="Exit Settings")
tp2_exit_percentage = input(title="TP2 Exit Percentage", type=input.integer, defval=30, step=1, maxval=100, inline="4", group="Exit Settings")
tp3_atr_multiplier = input(title="TP3 ATR Multiplier", type=input.float, defval=2.6, step=0.1, inline="5", group="Exit Settings")
tp3_exit_percentage = input(title="TP3 Exit Percentage", type=input.integer, defval=30, step=1, maxval=100, inline="5", group="Exit Settings")
tp4_atr_multiplier = input(title="TP4 ATR Multiplier", type=input.float, defval=4, step=0.1, inline="6", group="Exit Settings")
tp4_exit_percentage = input(title="TP4 Exit Percentage", type=input.integer, defval=10, step=1, maxval=100, inline="6", group="Exit Settings")
tp5_atr_multiplier = input(title="TP5 ATR Multiplier", type=input.float, defval=8, step=0.1, inline="7", group="Exit Settings")
tp5_exit_percentage = input(title="TP5 Exit Percentage", type=input.integer, defval=10, step=1, maxval=100, inline="7", group="Exit Settings")
var long_sl = close - (atr * sl_atr_multiplier)
var long_tp1 = close + (atr * tp1_atr_multiplier)
var long_tp2 = close + (atr * tp2_atr_multiplier)
var long_tp3 = close + (atr * tp3_atr_multiplier)
var long_tp4 = close + (atr * tp4_atr_multiplier)
var long_tp5 = close + (atr * tp5_atr_multiplier)
var short_sl = close + (atr * sl_atr_multiplier)
var short_tp1 = close - (atr * tp1_atr_multiplier)
var short_tp2 = close - (atr * tp2_atr_multiplier)
var short_tp3 = close - (atr * tp3_atr_multiplier)
var short_tp4 = close - (atr * tp4_atr_multiplier)
var short_tp5 = close - (atr * tp5_atr_multiplier)
var is_long_sl_moved = false
var is_short_sl_moved = false
is_open_long = strategy.position_size > 0
is_open_short = strategy.position_size < 0
var in_ssl_long = false
var in_ssl_short = false
var start_trading = false
var ssl_long_entry = false
var ssl_short_entry = false
var did_prev_bar_ssl_flip = false
// Ensure crossover occurrs before entering first position. This ensures first entry after chosen start date is an actual entry and not just entering on start date
if not ssl_long_entry and not ssl_short_entry and in_date and not start_trading
start_trading := crossover(close, sslDown) or crossunder(close, sslDown)
if in_date and start_trading
ssl_long_entry := close > sslDown and qqe_blue_bar and qqe_line > 0
ssl_short_entry := close < sslDown and qqe_red_bar and qqe_line < 0
remaining_percent = 100
var total_tokens = float(na)
total_tokens := strategy.equity * 0.10 / close
tp1_percent = tp1_exit_percentage <= remaining_percent ? tp1_exit_percentage : remaining_percent
remaining_percent -= tp1_percent
entry_1 = total_tokens * (tp1_percent / 100)
tp2_percent = tp2_exit_percentage <= remaining_percent ? tp2_exit_percentage : remaining_percent
remaining_percent -= tp2_percent
entry_2 = total_tokens * (tp2_percent / 100)
tp3_percent = tp3_exit_percentage <= remaining_percent ? tp3_exit_percentage : remaining_percent
remaining_percent -= tp3_percent
entry_3 = total_tokens * (tp3_percent / 100)
tp4_percent = tp4_exit_percentage <= remaining_percent ? tp4_exit_percentage : remaining_percent
remaining_percent -= tp4_percent
entry_4 = total_tokens * (tp4_percent / 100)
tp5_percent = tp5_exit_percentage <= remaining_percent ? tp5_exit_percentage : remaining_percent
remaining_percent -= tp5_percent
entry_5 = total_tokens * (tp5_percent / 100)
if not is_long_sl_moved and high >= long_tp1 and move_sl_on_tp and use_tp_sl
is_long_sl_moved := true
strategy.exit("LongExit2", "LongEntry2", stop=strategy.position_avg_price, limit=long_tp2)
strategy.exit("LongExit3", "LongEntry3", stop=strategy.position_avg_price, limit=long_tp3)
strategy.exit("LongExit4", "LongEntry4", stop=strategy.position_avg_price, limit=long_tp4)
strategy.exit("LongExit5", "LongEntry5", stop=strategy.position_avg_price, limit=long_tp5)
if not is_short_sl_moved and low <= short_tp1 and move_sl_on_tp and use_tp_sl
is_short_sl_moved := true
strategy.exit("ShortExit2", "ShortEntry2", stop=strategy.position_avg_price, limit=short_tp2)
strategy.exit("ShortExit3", "ShortEntry3", stop=strategy.position_avg_price, limit=short_tp3)
strategy.exit("ShortExit4", "ShortEntry4", stop=strategy.position_avg_price, limit=short_tp4)
strategy.exit("ShortExit5", "ShortEntry5", stop=strategy.position_avg_price, limit=short_tp5)
if did_prev_bar_ssl_flip
did_prev_bar_ssl_flip := false
position_value = abs(strategy.position_size * close)
if in_ssl_long
label.new(x=bar_index, y=close, xloc=xloc.bar_index, yloc=yloc.abovebar, text=tostring(position_value), style=label.style_label_down, size=size.tiny)
else
label.new(x=bar_index, y=close, xloc=xloc.bar_index, yloc=yloc.belowbar, text=tostring(position_value), style=label.style_label_up, size=size.tiny)
if ssl_long_entry and in_date and not in_ssl_long
in_ssl_long := true
in_ssl_short := false
did_prev_bar_ssl_flip := true
long_sl := close - (atr * sl_atr_multiplier)
long_tp1 := close + (atr * tp1_atr_multiplier)
long_tp2 := close + (atr * tp2_atr_multiplier)
long_tp3 := close + (atr * tp3_atr_multiplier)
long_tp4 := close + (atr * tp4_atr_multiplier)
long_tp5 := close + (atr * tp5_atr_multiplier)
strategy.entry("LongEntry1", strategy.long, qty=entry_1)
strategy.entry("LongEntry2", strategy.long, qty=entry_2)
strategy.entry("LongEntry3", strategy.long, qty=entry_3)
strategy.entry("LongEntry4", strategy.long, qty=entry_4)
strategy.entry("LongEntry5", strategy.long, qty=entry_5)
if use_tp_sl
strategy.exit("LongExit1", "LongEntry1", stop=long_sl, limit=long_tp1)
strategy.exit("LongExit2", "LongEntry2", stop=long_sl, limit=long_tp2)
strategy.exit("LongExit3", "LongEntry3", stop=long_sl, limit=long_tp3)
strategy.exit("LongExit4", "LongEntry4", stop=long_sl, limit=long_tp4)
strategy.exit("LongExit5", "LongEntry5", stop=long_sl, limit=long_tp5)
is_long_sl_moved := false
if ssl_short_entry and in_date and not in_ssl_short
in_ssl_short := true
in_ssl_long := false
did_prev_bar_ssl_flip := true
short_sl := close + (atr * sl_atr_multiplier)
short_tp1 := close - (atr * tp1_atr_multiplier)
short_tp2 := close - (atr * tp2_atr_multiplier)
short_tp3 := close - (atr * tp3_atr_multiplier)
short_tp4 := close - (atr * tp4_atr_multiplier)
short_tp5 := close - (atr * tp5_atr_multiplier)
strategy.entry("ShortEntry1", strategy.short, qty=entry_1)
strategy.entry("ShortEntry2", strategy.short, qty=entry_2)
strategy.entry("ShortEntry3", strategy.short, qty=entry_3)
strategy.entry("ShortEntry4", strategy.short, qty=entry_4)
strategy.entry("ShortEntry5", strategy.short, qty=entry_5)
if use_tp_sl
strategy.exit("ShortExit1", "ShortEntry1", stop=short_sl, limit=short_tp1)
strategy.exit("ShortExit2", "ShortEntry2", stop=short_sl, limit=short_tp2)
strategy.exit("ShortExit3", "ShortEntry3", stop=short_sl, limit=short_tp3)
strategy.exit("ShortExit4", "ShortEntry4", stop=short_sl, limit=short_tp4)
strategy.exit("ShortExit5", "ShortEntry5", stop=short_sl, limit=short_tp5)
is_short_sl_moved := false