Set the parameter of the wind mode

The winds have led to three modes of running that are currently recommended by the company:The replenishment mode is described as follows: the usual replenishment is 2 times; the innovation mode is followed by 6 replenishments of 2.05 times; the tail part of the solution is followed by 9 replenishments of 2 times; the self-determination coefficient is 1.33 replenishments by default.

The first one is the classic model of double-entry bookkeeping:Opened dischttps://www.fmz.com/m/robot/273849 It is recommended to run more than 2000 U, 200 U corresponds to one coin, and 2000 U runs 10 mainstream coins (try not to run demon coins and single-sidedly amplified coins). A real disk suggests a maximum of 5000 U, a model that has been tested and perfected over a long period of time.

The second type is the self-determined multiple of y:Opened dischttps://www.fmz.com/robot/358597 It is recommended to run more than 800U, 400U corresponds to one coin, 2000U runs 4-5 amplitude large active coins, the maximum number of replenishments of more funds can be changed to 23 or more, multiples 1.2 (conservative) -1.4 (radical). A real disk suggests a maximum of 3000 U, large funds can change the small leverage to increase the opening position U run, do not need to run too much coin, as long as the active return is high. Because each replenishment is about 1.3 times, so small calls are not available, characterized by the easy appearance of a buckle, but also more than the fast-forward quick-out mode can buckle the buckle.

1.24 times 8U open position replenishment 20 times needs 120U, 1.33 times 8U open position replenishment 20 times needs 360U, 1.5 times 8U open position replenishment 20 times needs 2600U

The third is to go fast, go fast, go fast, do more: It is recommended to start running above 1200U, 150U corresponds to one coin, 1200U runs 8 amplitude active coins, the requirements for the coin are slightly higher, need to be cleaned regularly inactive. The characteristic is a quick stop when small callback, can not be checked, strictly in accordance with the stop loss parameters.

Other parameters can be fine-tuned according to your understanding