grepstart.pyNombor proses yang diperoleh oleh kill-9
### API注意事项：
- 如果你不是运行在固定IP的云主机上的话，请不要设置绑定IP，否则无法使用；
- 为了你的账号安全申请API时，请勾选只读和交易权限，请勿勾选提现权限；
- `okex_api.json`中的flag为交易盘选项，0为真实盘，1为模拟盘；
### 常见问题
##### 开始交易后卡住不动
- API设置不正确，请检查API是否配置正确，真实盘和模拟盘的API是不同的，需要分别设置；
- 国内网络无法访问交易所，请使用境外云主机运行执行体，推荐使用香港云主机；
- 请勿在国内使用翻墙软件开启执行体，由于兼容性的问题，使用翻墙软件很大概率会无法运行；
from okex.trade import trade,pos_info,acc_info,select_last
import okex.api as api
import okex.Trade_api as Trade
import time
import json
from okex.log import log
# 策略源码完整版下载地址 https://github.com/Find-Dream/BTCUSDT
def main():
nowtime = time.time()
st = time.localtime(nowtime)
update = time.strftime('%Y-%m-%d',st)
filenamedate = time.strftime('%Y%m%d',st)
logfilename = 'mark_'+ str(filenamedate)
log(logfilename,'========================【获取基础信息开始】========================')
btcusdt_api_data = api.btcusdt_api()
log(logfilename,'btcusdt_api_data：'+str(btcusdt_api_data))
btcusdt_api = btcusdt_api_data['rule']
log(logfilename,'btcusdt_api'+str(btcusdt_api))
pos_api = btcusdt_api_data['pos']
log(logfilename,'pos_api'+str(pos_api))
pos_okex = {}
acc_okex = {}
try:
acc_api = api.select_acc()
log(logfilename,'读取本地保存的账户信息'+str(acc_api))
except:
acc_okex['lever'] = 1
acc_info_data = acc_info()[0]['details']
for i in acc_info_data:
if i['ccy'] == 'USDT':
acc_okex['ccy'] = i['cashBal']
log(logfilename,'读取接口账户余额'+str(i['cashBal']))
for i in pos_info():
if i['mgnMode'] == 'cross' and i['posSide'] == 'long':
pos_okex['long'] = i['pos']
if i['pos'] != '0':
acc_okex['lever'] = i['lever']
log(logfilename,'读取接口long账户杠杆倍数：'+str(i['lever']))
else:
acc_okex['lever'] = acc_api['lever']
log(logfilename,'读取本地long账户杠杆倍数：'+str(acc_api['lever']))
elif i['mgnMode'] == 'cross' and i['posSide'] == 'short':
pos_okex['short'] = i['pos']
if i['pos'] != '0':
acc_okex['lever'] = i['lever']
log(logfilename,'读取接口short账户杠杆倍数：'+str(i['lever']))
api.set_acc(json.dumps(acc_okex))
log(logfilename,'写入本地账户信息：'+str(acc_okex))
last = float(select_last())
log(logfilename,'读取当前价格：'+str(last))
max_sz = int(float(acc_okex['ccy']) * float(acc_okex['lever']) / last * 100)
log(logfilename,'最大交易量：'+str(max_sz))
sz_r = max_sz / 20
log(logfilename,'交易量系数：'+str(sz_r))
pos_api_id = int(btcusdt_api['id'])
pos_api_posSide = btcusdt_api['posside']
pos_api_side = btcusdt_api['side']
pos_api_sz = int(int(btcusdt_api['sz']) * sz_r)
pos_api_uptime = int(btcusdt_api['uptime'])
pos_api_long = int(int(pos_api['long']) * sz_r)
pos_api_short = int(int(pos_api['short']) * sz_r)
log(logfilename,'pos_api_long：'+str(pos_api_long)+',pos_api_short:'+str(pos_api_short)+',pos_api_sz:'+str(pos_api_sz))
log(logfilename,'本地仓位信息pos_okex：'+str(pos_okex))
try:
pos_log_done = int(api.pos_log_done())
except:
pos_log_done = api.pos_log_done()
log(logfilename,'pos_log_done:'+str(pos_log_done))
log(logfilename,'========================【获取基础信息结束】========================')
log(logfilename,'========================【mark任务开始】========================')
log(logfilename,'判断pos_log_done_id是否为int型:'+str(type(pos_log_done)))
if isinstance(pos_log_done,int):
log(logfilename,'pos_log_done_id为int型，判断pos_log_done_id与pos_log_id,pos_api_id:'+str(pos_api_id)+',pos_log_done:'+str(pos_log_done))
if pos_api_id > pos_log_done:
log(logfilename,'API的pos_log_id大于pos_log_done_id，判断API更新时间是否在10秒以内,nowtime:'+str(nowtime)+',pos_api_uptime:'+str(pos_api_uptime))
if nowtime < (pos_api_uptime + 13):
log(logfilename,'api更新时间在10秒内，判断api交易方向,pos_api_posSide'+str(pos_api_posSide)+',pos_api_side:'+str(pos_api_side))
if pos_api_posSide == 'long' and pos_api_side == 'buy':
log(logfilename,'api交易方向：long-buy，判断当前持仓信息与api是否一致')
if int(pos_okex['long']) + int(pos_api_sz) == int(pos_api_long):
log(logfilename,'当前持仓信息与api一致，执行交易,当前持仓：'+str(pos_okex['long'])+',API持仓：'+str(pos_api_long)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,pos_api_sz,pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
elif int(pos_okex['long']) + int(pos_api_sz) < int(pos_api_long):
log(logfilename,'当前持仓信息与api一致，执行交易,当前持仓：'+str(pos_okex['long'])+',API持仓：'+str(pos_api_long)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,pos_api_sz,pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
else:
log(logfilename,'long仓信息不一致，请将long仓手动平仓后再进行自动交易,当前持仓：'+str(pos_okex['long'])+',API持仓：'+str(pos_api_long)+',API交易数量：'+str(pos_api_sz))
elif pos_api_posSide == 'long' and pos_api_side == 'sell':
log(logfilename,'api交易方向：long-sell，判断是否符合平仓条件')
if int(pos_okex['long']) > 0:
log(logfilename,'符合平仓条件，当前持仓：'+str(pos_okex['long'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,int(pos_okex['long']),pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
else:
log(logfilename,'long仓信息不一致，请将long仓手动平仓后再进行自动交易,当前持仓：'+str(pos_okex['long'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
elif pos_api_posSide == 'short' and pos_api_side == 'sell':
log(logfilename,'api交易方向：short-sell，判断当前持仓信息与api是否一致')
if int(pos_okex['short']) + int(pos_api_sz) == int(pos_api_short):
log(logfilename,'符合开仓条件，执行交易,当前持仓：'+str(pos_okex['short'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,pos_api_sz,pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
elif int(pos_okex['short']) + int(pos_api_sz) < int(pos_api_short):
log(logfilename,'符合开仓条件，执行交易,当前持仓：'+str(pos_okex['short'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,pos_api_sz,pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
else:
log(logfilename,'short仓信息不一致，请将short仓手动平仓后再进行自动交易,当前持仓：'+str(pos_okex['short'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
elif pos_api_posSide == 'short' and pos_api_side == 'buy':
log(logfilename,'api交易方向：short-buy，判断是否符合平仓条件')
if int(pos_okex['short']) > 0:
log(logfilename,'符合平仓条件，当前持仓：'+str(pos_okex['short'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
trade_ok = trade(pos_api_side,pos_api_posSide,pos_okex['short'],pos_api_id)
log(logfilename,'执行结果：'+str(trade_ok))
else:
log(logfilename,'short仓信息不一致，请将short仓手动平仓后再进行自动交易,当前持仓：'+str(pos_okex['short'])+',API持仓：'+str(pos_api_short)+',API交易数量：'+str(pos_api_sz))
else:
log(logfilename,'api更新时间超过10秒内，已错过最佳交易时间,nowtime:'+str(nowtime)+',pos_api_uptime:'+str(pos_api_uptime))
else:
log(logfilename,'API的pos_log_id不大于pos_log_done_id，api无新数据，继续执行监控,pos_api_id:'+str(pos_api_id)+',pos_log_done:'+str(pos_log_done))
else:
log(logfilename,'pos_log_done_id不为int型')
api.set_pos_log_done(pos_api_id)
log(logfilename,'========================【mark任务结束】========================')