Sumber daya yang dimuat... Pemuatan...

Strategi perdagangan lintas rata-rata bergerak ganda

Penulis:ChaoZhang, Tanggal: 2023-11-21 12:26:53
Tag:

img

Gambaran umum

Strategi ini menentukan entri dan keluar berdasarkan sinyal crossover dari dua rata-rata bergerak sederhana (SMA). Secara khusus, SMA jangka pendek memiliki periode 14, sedangkan SMA jangka panjang memiliki periode 28. Sinyal panjang dipicu ketika SMA jangka pendek melintasi SMA jangka panjang. Sebaliknya, sinyal pendek dipicu ketika SMA jangka pendek melintasi di bawah SMA jangka panjang.

Logika Strategi

  1. Input

    • Pengaturan Indikator: Mendefinisikan periode untuk SMA cepat dan lambat
    • Take Profit dan Stop Loss: Mengkonfigurasi persentase untuk mengambil keuntungan dan stop loss
    • Manajemen Uang: Tentukan modal awal, biaya komisi, dll.
  2. Variabel

    Variabel perantara didefinisikan untuk menyimpan nilai untuk harga mengambil keuntungan, harga stop loss, ukuran posisi dll. Ini menghindari perhitungan berulang.

  3. Generasi Sinyal

    SMA crossover digunakan untuk menentukan sinyal panjang dan pendek.

  4. Aturan Masuk

    Ketika sinyal masuk dipicu, setiap posisi yang ada di arah yang berlawanan dipadatkan terlebih dahulu sebelum pesanan baru ditempatkan berdasarkan logika strategi.

  5. Peraturan Keluar

    Aturan mengambil keuntungan dan stop loss dikonfigurasi untuk keluar posisi.

  6. Pengelolaan Uang

    Ukuran posisi digunakan untuk mengelola risiko per perdagangan.

Keuntungan

  1. Logika sederhana, mudah dimengerti
  2. Pendapatan yang dapat dikontrol
  3. Parameter yang dapat dioptimalkan

Risiko dan Pengurangan

  1. Sinyal lintas SMA yang tertinggal

    Mempertimbangkan periode SMA yang lebih pendek, atau melengkapi dengan indikator tambahan

  2. Peningkatan risiko stop loss di pasar range

    Tingkatkan persentase stop loss, atau gunakan trailing stop

  3. Parameter suboptimal dapat memperkuat kerugian

    Tekanan backtest dan mengoptimalkan parameter

Peluang Peningkatan

  1. Lengkapi dengan indikator tambahan

    Misalnya MACD, KD dll untuk mengurangi keterlambatan sinyal

  2. Mengoptimalkan periode SMA

    Uji lebih banyak kombinasi periode SMA pendek dan panjang

  3. Eksperimen dengan strategi mengambil keuntungan/stop loss lainnya

    Misalnya nilai $ tetap, trailing stop dll

Kesimpulan

Strategi ini memiliki logika yang jelas dan sederhana, hasil backtest yang menjanjikan, dan mudah dioperasikan - cocok untuk trader pemula.


/*backtest
start: 2023-10-21 00:00:00
end: 2023-11-20 00:00:00
period: 4h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © BigJasTrades https://linktr.ee/bigjastrades 

// READ THIS BEFORE USE:
// This code is provided as an example strategy for educational purposes only.  It comes with NO warranty or claims of performance.
// It should be used as a basis for your own learning and development and to create your own strategies.
// It is NOT provided to enable you to profitably trade. 
// If you use this code or any part of it you agree that you have thoroughly tested it and determined that it is suitable for your own purposes prior to use.
// If you use this code or any part of it you agree that you accept all risk and you are responsibile for the results.

//@version=5
strategy(title = "Strategy Template", shorttitle = "ST v1.0", overlay = true, pyramiding = 1, initial_capital = 1000, commission_type = strategy.commission.percent, commission_value = 0.1, max_labels_count = 500)

//INPUTS
//indicator values
shortSMAlength              = input.int(defval = 14, title = "Short SMA Length", tooltip = "Set the length of the short simple moving average here.", minval = 1, step = 1, group = "Indicator Settings")
longSMAlength               = input.int(defval = 28, title = "Long SMA Length", tooltip = "Set the length of the long simple moving average here.", minval = 1, step = 1, group = "Indicator Settings")
//compounding
compoundingSelected         = input.bool(defval = true, title = "Compounding", tooltip = "Select this option if you want to compound your net profits.", group = "Compounding")
//take profit and stop loss
takeProfitSelected          = input.bool(defval = true, title = "Use Take Profit", tooltip = "Select this to enable take profits.", group = "Take Profit and Stop Loss")
takeProfitPercent           = input.float(defval = 1.0, title = "Take Profit %", tooltip = "Set the value of take profits here.", minval = 0.1, step = 0.1, group = "Take Profit and Stop Loss")
stopLossSelected            = input.bool(defval = true, title = "Use Stop Loss", tooltip = "Select this to enable stop losses.", group = "Take Profit and Stop Loss")
stopLossPercent             = input.float(defval = 1.0, title = "Take Profit %", tooltip = "Set the value of stop losses here.", minval = 0.1, step = 0.1, group = "Take Profit and Stop Loss")
//trading window
startDate                   = input(defval = timestamp("1 Jan 2023 00:00:00"), title = "Start Date", tooltip = "Use this to set the date and time when Viva will start placing trades.  Set this to a time just after the last candle when activating auto trading.", group = "TRADING WINDOW")
endDate                     = input(defval = timestamp("1 Jan 2030 00:00:00"), title = "End Date", tooltip = "Use this to set the date and time when Viva will stop placing trades.", group = "TRADING WINDOW")

//VARIABLES
var float tradingCapital    = na //trading capital is used to calculate position size based on the intitial capital and, if compounding is selected, also the net profit
var float positionSize      = na //position size is used to set the quantity of the asset you want to buy.  It is based on the initial capital and the net profit if compounding is selected.
var float takeProfitPrice   = na //this is used for take profit targets if selected
var float stopLossPrice     = na //this is used for stop loss if selected

inTradeWindow               = true
strategy.initial_capital = 50000
//COMPOUNDING
if compoundingSelected // set the tradingCapital available to the strategy based on wither Compounding has been selected or not.  This will be used to determine the position size.
    tradingCapital := strategy.initial_capital + strategy.netprofit
else
    tradingCapital := strategy.initial_capital

//ENTRY CONDITIONS
//replace these with your own conditions
longCondition = ta.crossover(source1 = ta.sma(source = close, length = shortSMAlength), source2 =  ta.sma(source = close, length =longSMAlength))
shortCondition = ta.crossunder(source1 = ta.sma(source = close, length = shortSMAlength), source2 = ta.sma(source = close, length = longSMAlength))

//EXIT CONDITIONS
//Exit conditions are based on stop loss, take profit and the opposite entry condition being present.  Stop Loss and Take Profit are contained in the strategy.exit code below and are based on the value assigned in the Inputs.


//ENTRY ORDERS
//Enter Long
if longCondition and inTradeWindow
    //close any prior short positions
    if strategy.position_size < 0 //if in a short position
        strategy.close_all(comment = "Buy to Close")
    //set position size
    positionSize := tradingCapital / close
    //enter long position
    strategy.entry(id = "Buy to Open", direction =  strategy.long, qty = positionSize)

//Enter Short
if shortCondition and inTradeWindow
    //close any prior long positions
    if strategy.position_size > 0 //if in a long position
        strategy.close_all(comment = "Sell to Close")
    //set position size
    positionSize := tradingCapital / close
    //enter short position
    strategy.entry(id = "Sell to Open", direction =  strategy.short, qty = positionSize)

//IN-ORDER MANAGEMENT
//placeholder - none used in this template


//EXIT ORDERS
//Stop Loss and Take Profit for Long Positions
if strategy.opentrades > 0 and strategy.position_size > 0 and (takeProfitSelected or stopLossSelected)   //if there is an open position and it is a long position and either a take profit or sto ploss is selected.
    if takeProfitSelected
        takeProfitPrice := strategy.position_avg_price * (1 + (takeProfitPercent / 100))
    else
        takeProfitPrice := na
    if stopLossSelected
        stopLossPrice := strategy.position_avg_price * (1 - (stopLossPercent / 100))
    else
        stopLossPrice := na
    strategy.exit(id = "Exit", from_entry = "Buy to Open", qty_percent = 100, profit = takeProfitPrice, loss = stopLossPrice, comment_profit = "Take Profit", comment_loss = "Stop Loss")

//Stop Loss and Take Profit for Short Positions
if strategy.opentrades > 0 and strategy.position_size < 0 and (takeProfitSelected or stopLossSelected)   //if there is an open position and it is a short position and either a take profit or sto ploss is selected.
    if takeProfitSelected
        takeProfitPrice := strategy.position_avg_price * (1 - (takeProfitPercent / 100))
    else
        takeProfitPrice := na
    if stopLossSelected
        stopLossPrice := strategy.position_avg_price * (1 + (stopLossPercent / 100))
    else
        stopLossPrice := na
    strategy.exit(id = "Exit", from_entry = "Buy to Open", qty_percent = 100, profit = takeProfitPrice, loss = stopLossPrice, comment_profit = "Take Profit", comment_loss = "Stop Loss")


//VISUALISATIONS
plot(series = ta.sma(source = close, length = shortSMAlength), title = "Short SMA", color = color.new(color = color.red, transp = 50), linewidth = 2)
plot(series = ta.sma(source = close, length = longSMAlength), title = "Long SMA", color = color.new(color = color.blue, transp = 50), linewidth = 2)

bgcolor(color = longCondition ? color.new(color = color.green, transp = 95) : na, title = "Long")
bgcolor(color = shortCondition ? color.new(color = color.red, transp = 95) : na, title = "Short")

Lebih banyak